2026 John Deere 35P

The John Deere 35P Compact Excavator is a 3.6-metric ton zero-tail-swing mini excavator powered by a Yanmar 3TNV88F diesel engine producing 23.3 net horsepower at 2,400 rpm. The zero-tail-swing design maximizes maneuverability in tight urban and residential areas with compact transport dimensions. Equipped with an 8 feet 1 inch boom and 4 feet 4 inch standard arm, the machine delivers 17 feet 1 inch maximum digging reach, 10 feet maximum digging depth, 16 feet maximum cutting height with canopy, and 11 feet 4 inches maximum dumping height with canopy. An optional 5 feet 8 inch long arm increases digging depth to 11 feet 4 inches and reach to 18 feet 1 inch. Digging forces include 6,085 pounds bucket breakout and 4,277 pounds arm force with standard arm. Lift capacity reaches 3,453 pounds over the front at ground level at 10-foot radius with blade down and standard counterweight. The standard 5 feet 9 inch backfill blade adjusts 14.2 inches above or 15.7 inches below ground, with optional hydraulic angle blade available. The open-center hydraulic system features two variable-displacement pumps each delivering 10.1 gpm and one fixed-gear pump providing 6.0 gpm, with 16.2 gpm auxiliary flow at the boom end via standard quick-couplers. Independent swing boom provides 72 degrees left and 62 degrees right offset with canopy. Standard auxiliary return-flow selector valve accommodates one-way or two-way hydraulic attachments. Hydraulic pilot-operated controls with excavator-to-backhoe pattern selector provide precise operation. Auto-idle, auto shutdown, and power/economy modes optimize fuel efficiency. The spacious operator station features wide entryway, vinyl seat with fore/aft adjustment, foldable travel pedals, and comprehensive instrumentation. Optional ROPS/TOPS/FOPS cab includes air conditioning, heating, and optional cloth suspension seat. Rubber cab mounts and noise-reducing muffler minimize vibration and sound. Two-speed propel motors with automatic shifting provide 1.7 mph low and 2.7 mph high range. Standard 12-inch rubber tracks deliver 4.6 psi ground pressure with canopy and standard counterweight, with optional steel tracks or rubber crawler pads available. The mechanical quick-coupler accepts buckets, hammers, augers, clamps, and compactors. Heavy-duty side shields protect components, while single-pin swing-post increases boom rigidity and reinforced D-channel side frames extend wear life. Hinged doors provide wide-open cooler access, and operator station tilts forward 50 degrees for major service access. Standard 540-pound counterweight with optional 529-pound additional counterweight available for long arm configuration. Fluid capacities include 11.1-gallon fuel tank, 8.5-gallon hydraulic tank, 5.3-quart cooling system, and 7.6-quart engine oil. Standard equipment includes 55-amp alternator, two halogen work lights, wet-disc swing brake with 9.0 rpm swing speed, and 360-degree rotation. Optional JDLink connectivity enables Operations Center access and Connected Support. Operating weight is 7,760 pounds with canopy and standard arm, or 8,135 pounds with cab, with transport length of 15 feet 3 inches and 8 feet 2 inches height.